Finnish-Style M28/M39 Hybrid Trigger Set

- These triggers now have adjustable second-stage pulls! -

Trigger set #188 is being built, and should be ready before July 15.
Purchaser Agreement/Standard Disclaimer

It is important that you, as buyer, analyze all operating parameters of your rifle before, during and after trigger installation. Due to the diversity of Mosin-Nagants throughout the years and the possibilities for installation error, the buyer, after considering the operating conditions and the rifle’s tolerances, is solely responsible for assuring that the application, installation, performance, safety and warning requirements are met.

By proceeding to purchase, you acknowledge that you understand the above and will not hold Josh Smith or Smith-Sights LLC responsible for any damages resulting in improper installation or failure to assure safe functioning after installation. 

About This Trigger

The Finnish recognized early a need for an improved trigger to allow their riflemen to take advantage of the improved precision of their rifles.

Accordingly, they set in motion research ultimately culminating in the development of the M39's trigger.  The M27 and M39 have the only true two-stage trigger pulls of any Mosin of which I'm aware.  Others have pseudo-two-stage triggers in which the first stage is only spring-loaded pre-travel. This is NOT that. My trigger is a true two-stage.

My trigger set is the next evolution of these triggers.

The first stage rides on a roller bearing for the smoothest feel available, while the second stage is adjustable to your personalized preference using an included hex wrench.

This is a complete trigger set.

It includes a trigger, sear, and spring. The sear is pinned to the trigger by a piece that also acts as a safety bar which helps to prevent the sear from sticking should you release the trigger before firing.


The price for the two stage trigger and sear combo with mousetrap spring is $95.00, comparable to other aftermarket triggers which either have fewer options, take more work (and damage to the rifle) to install, or both.


What this means for the buyer


Simply put, this is the best trigger set for your Mosin. 

It requires no inletting of the stock -- this is a bonus for those who wish to preserve their Mosins' historical integrity -- while providing a crisp second stage that allows the shooter to hit his target.

The fitting is done for you. 

I use a 91/30 receiver to do this.  However, as receivers varied over the years, you must be prepared to deal with any mismatches. 

The end user must be able to deal with either of these issues with email support, or have a gunsmith who is willing to talk with me.

Availability

I produce about one trigger set per week. 


Purchasing

This is not your standard "online shopping experience."

If you want a trigger set, please contact me using the Trigger Set Order Form immediately below. I want to establish a communication line for support, should you need it.



Trigger Set Order Form

Check the appropriate boxes:





This query is a(n)



IMPROPER SELECTION, IMPROPER USE, AND/OR IMPROPER INSTALLATION, MAY CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.

It is important that you, as buyer, analyze all operating parameters of your rifle before, during and after trigger installation. Due to the diversity of Mosin-Nagants throughout the years and the possibilities for installation error, the buyer, after considering the operating conditions and the rifle’s tolerances, is solely responsible for assuring that the application, installation, performance, safety and warning requirements are met.  You, the buyer, will at no time hold Josh Smith and/or Smith-Sights LLC liable for improper installation and/or failure to check safe functioning after installation.


Trigger Pivot Pin

$ 10 USD

 

 

 

 

 

 

 

 

 

 

Price includes shipping.  No trigger purchase necessary.

 

Trigger Screw

$ 10 USD

 

 

 

 

 

 

 

 

 

 

Price includes shipping.  No trigger purchase necessary.

 

Make a free website with Yola